Top End Kit for 1992-up Magnum Small Block Chrysler EnginesThere are two Magnum kits available. Both are machined for Jesel rockers and use Magnum style hollow push rods. The 360-1KMAG kit has 360-1, 210cc runner heads that are perfect for 360 and 400 plus cid bracket and serious street engines. The 360-2KMAG kit has 360-2, 180cc runner oval port heads that work best on 360 street engines. Both have the very effective stock 18 degree valve angles and come bowl ported and port matched when ordered assembled in kits. Both heads have 2.100 x 1.650 dia valves and come with hydraulic, solid or roller springs good for .650 in lift (must furnish cam specs when ordering). Optional springs & valves are available. The 63cc chambers can be machined to 53cc. Top End Kits include: - 360-1 std port or 360-2 oval port head assemblies
- Jesel Rocker Arm Assembly
- Hollow chrome moly push rods
- Head Bolts
- Head Gaskets, Intake/Exhaust gaskets
- 360-1 has 360-3R Intake Manifold
- 360-2 has 360-3 Intake Manifold
.FOR TECHNICAL INFORMATION go to the individual type head you are interested in. |
On all complete assembly packages, it is very possible that the valve springs are not correct for your camshaft. All valve springs should be checked for compatibility to your camshaft. Severe wear of valve train components and severe engine damage could result from failure to do this. Check spring requirements before heads are installed on the engine. If in doubt please contact your camshaft manufacturer or USA Performance Parts. We do carry optional springs for all of your needs.
